When Sending Images To [Cloud Sync. Service] - Panasonic LUMIX DC-LX100M2 Operating Instructions Manual

17mp four thirds mos sensor
Hide thumbs Also See for LUMIX DC-LX100M2:
Table of Contents

Advertisement

11. Using the Wi-Fi/Bluetooth function

When sending images to [Cloud Sync. Service]

Preparation:
• Register to the "LUMIX CLUB".
• Set up cloud synchronisation. (Use "PHOTOfunSTUDIO" on a PC or "Image App" on a
smartphone.)
Using [Cloud Sync. Service] (As of September 2018)
• Sent images are temporarily saved in the cloud folder so that they can be synchronised with
your device, such as a PC or a smartphone.
• A Cloud Folder stores transferred images for 30 days (up to 1000 pictures).
Be aware that images will be deleted automatically in the following cases:
– When over 30 days have passed since the transfer
(Images may be deleted even within 30 days if downloaded to all of the specified
devices.)
– When the number of images exceeds 1000 (This applies depending on the [Cloud Limit]
(P250)
setting.)
1
Select the menu.
>
MENU
[Send Images While Recording] or [Send Images Stored in the
Camera] > [Cloud Sync. Service]
2
Select [Via Network], and connect.
3
Check the send settings, and select [Set].
• To change the send setting, press [DISP.].
4
When [Send Images While Recording] has been selected
Take pictures.
When [Send Images Stored in the Camera] has been selected
Select the picture.
Not available in these cases:
• When [Auto Transfer] in [Bluetooth] is set to [ON], [Wi-Fi Function] is not available.
(P260)
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
(P248)
(P249)
(P263)
(P250)
259

Advertisement

Table of Contents
loading

Table of Contents