Table of Contents
Advertisement
8. Recording Motion Pictures
Recording motion pictures with reduced operational sounds
Applicable modes:
When you operate the zoom, buttons, etc. while recording motion pictures, the sounds
associated with such operations may be recorded. Using touch operations allows silent
operation.
1
Touch [
] while recording a motion picture.
2
Touch the desired icon.
: Zoom
: Exposure compensation
¢ It is displayed when [Exposure Comp.] is set in a function button.
3
Drag the slide bar to adjust the
setting.
[
]/[
]: Adjusts the setting slowly
[
]/[
]: Adjusts the setting quickly
• When the ambient temperature is high or a motion picture is recorded continuously, the
camera may display [
• When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording.
When [Rec Area] in the [Custom] menu ([Monitor / Display]) is set to [
during motion picture recording is displayed.
• If the Extra Optical Zoom are used before pressing the motion picture button, those settings
will be cleared, so the angle of view will change dramatically.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• The zoom speed decreases during the recording of a motion picture.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
Not available in these cases:
• Motion pictures cannot be recorded in the following cases.
– When using [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine]
in [Filter Settings]
– When recording with the Post Focus function
– When using [Panorama Shot]
– When taking pictures with [Time Lapse Shot]
– When using [Stop Motion Animation]
¢
] and then stop the recording. Wait until the camera cools down.
157
: ISO sensitivity
ISO
: Sound recording level adjustment
(P50)
], angle of view
Advertisement
Table of Contents
