Table of Contents
Advertisement
10. Using Menu Functions
[Light Composition]
Select multiple frames from 4K burst files that you wish to combine. Parts of the image that
are brighter than the preceding frame will be superimposed on the preceding frame to
combine the frames into one picture.
>
[Playback] > [Light Composition]
MENU
1
Press 2/1 to select the 4K photo burst files and press [MENU/SET].
2
Choose the combining method, and then press [MENU/SET].
[Composite Merging] setting
Select the frames you want to combine to superimpose brighter parts.
1 Drag the slide bar or use
frames to combine.
2 Press [MENU/SET].
• The selected frames are remembered, and the display
goes to the preview screen.
• Press 3/4 to select items and press [MENU/SET] to
perform the following operations.
– [Next]:
Lets you select more frames for combining.
– [Reselect]:
Discards the frame selected immediately before and lets you select a different image.
3 Repeat steps
• You can select up to 40 frames.
4 Press
/
3
4
[Range Merging] setting
Select the first and last frames to superimpose the brighter parts of the frames
between them.
1 Select the frame of the first picture, and press [MENU/SET].
• The selection method is the same as in step 1 of [Composite Merging] setting.
2 Select the frame of the last picture, and press [MENU/SET].
3
Select [Yes] at the confirmation screen, and then press [MENU/SET].
• Pictures are saved in JPEG format. Recording information (Exif information) of the first
frame such as shutter speed, aperture, and ISO sensitivity are also registered.
/
/
3
4
2
and
to select more frames to combine.
1
2
to select
, and then press [MENU/SET].
[Save]
/
to select the
1
218
Advertisement
Table of Contents
