9.
Stabilizer, Zoom and Flash
Adjust the flash output
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select the menu.
>
MENU
2
Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3
Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j3 EV] to [
•
Select [n0] to return to the original flash output.
i
j
•
[
] or [
] is displayed on the flash icon in the screen when the flash level is adjusted.
•
It can be set only when [Wireless]
set to [TTL].
•
The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P319)
Synchronizing the output of the built-in flash to the Exposure
Compensation
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P159.
•
The [Auto Exposure Comp.] setting also applies to an external flash.
[Rec] > [Flash]
i
3 EV] in steps of 1/3 EV.
(P209)
in [Flash] is set to [OFF] and [Firing Mode]
207
(P208)
(P319)
is