4
Diagnostics and error handling
4.2
Summary of diagnostics options
Depending on its configuration, the bus node CPX-FB23-24 supports various options for diagnostics
and error handling.
Diagnostics op
Brief description
tion
LED indicator
LEDs show configuration errors,
hardware faults, bus errors, etc.
directly.
Status bits
Internal inputs that supply coded
common diagnostic messages.
The 8 status bits are transmitted to
the interface as "inputs" cyclically
with the normal inputs.
I/O diagnostics
The I/O diagnostics interface is a
interface
fieldbus-independent diagnostics
interface at I/O level, which permits
access to internal data of the CPX
terminal (16 inputs and 16 outputs).
Diagnostics via
Diagnostic information can be shown
the handheld
on the CPX-MMI in a user-friendly
terminal
and menu-driven manner.
(CPX-MMI)
Diagnostics via
The CPX-FMT offers the option to
the Festo
display diagnostic information on a
Maintenance
PC.
Tool (CPX-FMT)
Tab. 4.1 Diagnostics options
Note
Note that the diagnostic information is dependent on the DIL switch settings on the bus
node, (è Section 2.4.10) as well as on the parameterisation of the CPX terminal.
Festo – P.BE-CPX-FB23-24-EN – 1411b – English
Advantages
Rapid detection of
errors "on-site".
Fast access to error
messages,
independent of the
module and master.
Detailed error
detection: the
diagnostics data can
be processed further,
e.g. by a PLC user
program
Fast "on-the-spot"
error detection
Fast "on-site" error
detection. Diagnostics
also possible from a
higher automation
level.
Detailed descrip
tion
è Section 4.4
è Section 4.5.1
and CPX system
description
è Section 4.5.2
and CPX system
description
è Description of
the CPX-MMI
è Online help for
the CPX-FMT
51