Safety And Requirements For Product Use; Safety; General Safety Information; Intended Use - Festo CPX-FB23 Description

1

Safety and requirements for product use

1 Safety and requirements for product use
1.1

Safety

1.1.1

General safety information

• Observe the general safety information in the corresponding chapters.
Specific safety regulations can be found immediately before the task instructions.
Note
Damage to the product from incorrect handling.
• Switch off the supply voltage before mounting and installation work. Switch on sup­
ply voltage only when mounting and installation work are completely finished.
• Never unplug or plug in a product when powered!
• Observe the handling specifications for electrostatically sensitive devices.
1.1.2

Intended use

The bus node documented in this description is intended as a participant on the fieldbus system Con­
trol & Communication link (CC-Link) from Mitsubishi exclusively for use in the Festo CPX terminal for
installation in machines or automated systems and used as follows:
– In excellent technical condition
– In original status without unauthorised modifications, except for the adaptations described in this
documentation
– Within the limits of the product defined by the technical data (è Appendix A.1)
Note
In the event of damage caused by unauthorised manipulation or other than intended
use, the guarantee is invalidated and the manufacturer is not liable for damages.
Festo – P.BE-CPX-FB23-24-EN – 1411b – English 7