Making Print Adjustments; Defining The System Setup Packet - Avery Dennison Monarch 9419 Reference Manual

M a k i n g P r i n t A d j u s t m e n t s
Horizontal and vertical adjustments can be made by adjusting the supply, print, or margin
positions. However, keep in mind the following:
♦ Supply adjustments across the width of the supply, such as the margin position, are based in
dots- either 203 dpi or 300 dpi, depending on the printhead density.
♦ Supply adjustments for the length of the supply, such as supply position or print adjustment,
are always measured in 1/203 of an inch, regardless of the printhead density.
D e f i n i n g t h e S y s t e m S e t u p P a c k e t
Use the system setup packet (A) to select the power up mode, display language, print separators
between batches, print a slashed zero, and select the symbol set.
Syntax
{I,A,powup_mode,language,sep_on,slash_zero,symbol_set | }
A1. A
A2. powup_mode
A3. language
A4. sep_on
A5. slash_zero
A6. symbol_set
Example
{I,A,0,0,0,0,0 | }
Powers up the printer in the online mode, displays prompts in English, does not print a separator
after each batch, prints standard zeros (without a slash), and uses the internal symbol set.
System Setup Packet
Printer's powerup mode. 0 is the default. Options:
0 Online mode. Printer is ready to receive data and print.
1 Offline mode. Operator can select a format and enter data to print.
Display Language. Enter 0. The 9419 displays prompts in 31 languages.
Refer to the Online Mode System Administrator's Guide for more
information.
Batch Separators. Enter 0. The printer does not print batch separators.
Slash Zero. 0 is the default. Options:
0 Print a standard zero
1 Print a zero with a slash through it
Symbol Set. 0 is the default. Options:
0 Internal
1 ANSI
2 Code Page 437 (Latin U.S.)
3 Code Page 850 (Latin 1)
4 Code Page 1250 (Latin 2)
5 Code Page 1251 (Cyrillic)
6 Code Page 1252 (Latin 1)
7 Code Page 1253 (Greek)
8 Code Page 1254 (Turkish)
Note: The Standard, Reduced, Bold, OCRA and HR fonts only support
the Internal Symbol Set (0). The CG Triumvirate™ typefaces only
support the ANSI (1) and DOS Code Page 437 (2) and 850 (3)
Symbol Sets. The scalable font (font#50) does not support Code
Page 1256 Arabic (10). Code pages 13-16 and 4-12 are for
downloaded TrueType fonts or the scalable font. Code page 19
requires a downloaded International TrueType font (stored on a
MicroSD card). TrueType fonts are designed to be regionally
specific; therefore, all code pages may not be supported in a given
font. See Appendix C,
information.
9 Code Page 1255 (Hebrew)
10 Code Page 1256 (Arabic)
11 Code Page 1257 (Baltic)
12 Code Page 1258 (Vietnamese)
13 DOS Code Page 852 (Latin 2)
14 DOS Code Page 855 (Russian)
15 DOS Code Page 857 (IBM Turkish)
16 DOS Code Page 860 (Portuguese)
19 Unicode
"Symbol Sets/ Code Pages" for more
Configuring the Printer 2-5