Special Considerations When Using Backfeed
Make a note of the following item s:
♦
Be careful when tearing supplies, becaus e the adhesive can adhere to the printhead or platen
roller.
♦
Backfeed affects eac h label in the on-demand mode or the first and las t label of the batch in
continuous mode.
♦
W hen backfeed is enabled and multiple batches are sent, the printer may not backfeed
between each batc h.
♦
Backfeed should only be us ed to advance labels to the desired dis pens e point.
♦
Backfeed does not interfere with the set supply, print, or margin positions .
♦
If the supply inter-label gap is not between .07 inc h to .15 inch (14 to 30 dots), adjus t the
dispense position and bac kfeed dis tanc e acc ordingly.
See the following graphic for a representation of the following adjustm ents: dispense position,
backfeed dis tance, supply pos ition, print pos ition, and m argin position.
2-18 Packet Reference Manual
Classification: Avery Dennison – Public