Xerox Phaser 3450 Service Manual page 37

5.9 Solenoid
1. Before you remove the Connector PBA, you should
remove:
- RH Cover (Refer to the 5.5)
- Main Drive Ass'y (Refer to the 5.7)
2. Unplug the MP Solenoid Harness and the Main
Solenoid Harness from the Connector PBA.
3. Remove two screws and take out the MP
Solenoid.
4. Remove two screws and take out the Main
Solenoid.
NOTICE : It is not necessary to disassemble
MP Solenoid
Disassembly and Reassembly
Main Solenoid
the Main Drive Ass'y to remove
the MP Solenoid
Service Manual
5-9