Xerox Phaser 3450 Service Manual page 55

5.25 Engine PBA
1. Before you remove the Engine Shield, you should
remove:
- Engine Shield (Refer to the 5.25)
5.26 Holder Pad Ass'y
1. Before you remove the Holder Pad Ass'y, you should
remove:
- MPF Ass'y (Refer to the 5.3)
- All Cover (Refer to the 5.5, 5.10, 5.12, 5.13, 5.14, 5.15)
- MP Pick-up Ass'y (Refer to the 5.22)
2. Unplug the connector and remove the two screws, as
shown below.
Disassembly and Reassembly
5. Remove four screws and take the Engine Board
out of the Duplex Unit.
3. Remove the photo interrupter and the MP Actuator
as shown below.
Friction Pad
MP Actuator
Holder Pad Ass'y
Engine PBA
Service Manual
5-27