Xerox Phaser 3450 Service Manual page 43

5.16 Fuser Ass'y
1. Before you remove the Fuser Ass'y, you should
remove:
- Rear Cover (Refer to the 5.12)
2. Remove four screws and take out the Fuser
Ass'y.
3. Remove two screws and take the Thermostat
out of the Fuser Ass'y.
Fuser Ass'y
Thermostat
Nut
Disassembly and Reassembly
4. Remove one screw, and then take out the
Thermistor from the Fuser Ass'y.
5. Remove two screws and take the Halogen
Lamp out of the Heat Roller.
Nut
Thermistor
Halogen Lamp
Service Manual
5-15