Xerox Phaser 3450 Service Manual page 35

5.7 Main Drive Ass'y
1. Before you remove the Right Side Ass'y, you should
remove:
- RH Cover (Refer to the 5.5)
2. Unplug the two Connectors after you remove the two
scres and take out the Cover Joint PBA.
3. Unplug the two connectors from the Main PBA
and the Connector PBA.
4. Remove the E-ring and take out the Clutch.
5. Remove six screws and take out the Main Drive
Cover Joint PBA
6. When separating the Main Motor ass'y, discon-
Clutch
E-ring
Disassembly and Reassembly
Ass'y.
Main Drive Ass'y
Cap Wire Power
nect the connector form the Main PBA, remove
4 screws, and then remove the Main Motor
ass'y.
Main Motor Ass'y
Service Manual
5-7