Xerox Phaser 3450 Service Manual page 45

5.17 Exit Drive
1. Before you remove the Exit Driver, you should
remove:
- Top Cover (Refer to the 5.13)
2. Unplug the Exit Driver Harness from the Main
PBA.
Disassembly and Reassembly
3. Take out the Cover-Motor-BLDC after remove
tow screws and take out the Exit Driver Ass'y
after remove three screws.
4.Remove two screws and take out the Exit Motor.
Cover-Motor-BLDC
Exit Motor
Service Manual
5-17