Alignment & Adjustments
6.2.1.5 In the Duplex Area
• Duplex Jam 1
1. Open the rear output tray.
2. Remove the jammed paper.
• Duplex Jam 2
1. Pull the paper tray out of the printer.
2. Pull down the metal plate inside of the printer.
CAUTION : Pulling the plate could cause an injury.Use the
lever on the left.
Service Manual
6-14
3. Close the rear output cover.
4. Open and close the top cover.Printing can be resumed.
3. Remove the jammed paper.
4. Slide the tray back into the printer.
5. Open and close the top cover.Printing can be resumed.