Xerox Phaser 3450 Service Manual page 49

5.21 REGI Ass'y
1. Before you remove the REGI Ass'y, you should
remove:
- Top Cover (Refer to the 5.13)
2. Unplug the Harness, Remove 3 screws.
3. Release the lock as shown below and lift up the
Gear Cap.
4. Take out the Regi. Ass'y as shown below.
REGI Ass'y
Gear Cap
Disassembly and Reassembly
5. Remove one screw and take out the Regi.
Sensor.
REGI Sensor
Sensor Holder
6. Unplug the Harness, remove one screw and
take out the PTL PBA.
PTL Upper
PTL PBA
PTL
CN17
Service Manual
5-21