Controller Specification; Electrical Specification - Xerox Phaser 3450 Service Manual

Specifications

3.2 Controller Specification

ITEM
Processor(CPU)
Memory
Emulation
Interface
Interface switching
Interface time-out
Font

3.3 Electrical Specification

ITEM
Input Voltage
Power Consumption
3.4 TONER Cartridge (Developer)
ITEM
Life span
Developing
Charging
Toner supply Method
Toner checking sensor
Ozone
Style
Service Manual
3-2
ARM946E-S (CLOCK SPEED 166Mhz)
FLASH ROM(PROGRAM) : 2MB flash
RAM : 16MB (Expandable to 144MB)
Option DIMM module : 16,32,64,128MB (SDRAM)
100Pin SDRAM DIMM (Samsung Printer Only)
EEPROM(NVRAM) : 512byte
PCL6 : win 3.1/95/98/ME/NT/2000/XP
Postscript Level3 : win 95/98 PPD , win NT4.0 PPD , Mac PPD
PCL5e : Linux
Parallel : IEEE 1284 Bidirectional Parallel
- Modes supported : Compatible,Nibble,Byte,ECP
USB(without HUB mode)
-USB 2.0 compliant
Serial : RS-232C
Network Interface : option for ML-2150
-10/100 Base TX
Automatic
5min(Max.)
45 Scalable Font , 1 Bitmap Font ,Postscript 3 internal font 136
DESCRIPTION
Nominal input voltage
Input voltage range
Nominal frequency
Frequency tolerance
Printing : 450W Avg or less (with SCF)
Idling : 100W Avg or less
Power Save : 20W Avg or less
DESCRIPTION
Starter : 5,000 sheets
Running : 10,000 sheets
Non-magnetic Contact Developing
Conductive Roller Charging
Exchange the Developer
Enable
0.1PPM or less
Single cartridge
DESCRIPTION
-12 Mbps 1 port
-10/100 Base TX 802.11b Wireless LAN (option for ML-2151N)
200-240 VAC / 100~127VAC
189-264 VAC/ 90~132VAC
50/60 MHz
+3Hz
A4 Size, IDC 5% pattern, SIMPLEX
REMARK
REMARK