Xerox Phaser 3450 Service Manual page 52

Disassembly and Reassembly
5.23 Pick-up Ass'y
1. Before you remove the Pick-up Unit, you should
remove:
- RH Cover (Refer to the 5.5)
- Main Drive Ass'y (Refer to the 5.7)
2. Remove E-Ring and take The Gear-Pick-up
Cam out. Take the Gear-Regi out.
Gear-Regi
3. Remove four screws. Then lift the Bottom Cross
Bar, as shown below.
Service Manual
5-24
Gear-Pick-up Cam
Bottom Cross Bar
4. Remove two springs from the Pick-up Ass'y.
5. Lift Guide-Front-Dup out in the direction of arrow as
shown below.
Tweezer
Stopper