Xerox Phaser 3450 Service Manual page 67

Hide thumbs Also See for Phaser 3450:
Table of Contents

Advertisement

Alignment & Adjustments
6.2.1.3 Around the Toner Cartridge (Jam1)
1. Open and close the top cover,and the jammed paper
should exit the printer.
If not,continue to Step 2.
2. Open the top cover and remove the toner cartridge.
CAUTION : To prevent damage to the toner cartridge,do not
expose it to light for more than a few minutes.Place
a piece of paper over the top of the toner cartridge
to shield it while it is out of the printer.
3. Carefully lift up the guide feed.
Service Manual
6-12
4. Gently pull the jammed paper towards you to remove it
from the printer.
If the jammed paper is not visible or there is resistance
when you pull the paper,go to "In the Paper Exit Area ".
5. Flip down the guide feed and reinstall the toner car-
tridge.
NOTE : If the toner cartridge is difficult to reinstall,make sure
that the guide feed has been flipped back down into
position.
6. Close the top cover.Printing can be resumed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents