Xerox Phaser 3450 Service Manual page 50

Disassembly and Reassembly
5.22 MP Pick-up Ass'y
1. Before you remove the MP Pick-up Ass'y, you should
remove:
- MPF Ass'y (Refer to the 5.3)
- Main Drive Ass'y (Refer to the 5.7)
- Top Cover (Refer to the 5.13)
- Inner Cover (Refer to the 5.15)
2. First of all remove two screws. Lift up the MP
Pick-up Shaft for taking out the MP Pick-up
Rack.
MP Pick Up
Rack
3. Remove the E-Rings on both ends of Gear
Ass'y and remove Ass'y as shown below.
E-Ring
Service Manual
5-22
Rack
Gear Ass'y
4. Pull and remove the lock equipment, then rotate
the Bearing as shown below.
Bearing
5. Slide the cam to the left by pulling on the MP
Pick-up shaft
Cam
MP Pick Up Shaft