Top Cover - Xerox Phaser 3450 Service Manual

5.13 Top Cover

1. Before you remove the Top Cover, you should
remove:
- RH Cover (Refer to the 5.5)
- LH Cover (Refer to the 5.10)
2. Open the MPF Ass'y, the Rear Cover, the Open
Cover.
3. Unplug the two Connectors after you remove
the three screws from the Main PBA.
Cover Open
Sensor
CN20
Key Panel
Cover Open
Panel
CN4
Disassembly and Reassembly
4. Unlatch both ends of the Top Cover.
5.Unlatch the hook and take out the Top Cover.
Top Cover
6. Remove 7 screws, and then take out the LCD
Panel and the Key Panel.
Key Panel
LCD Panel
Service Manual
5-13