Open Cover; Inner Cover - Xerox Phaser 3450 Service Manual

Disassembly and Reassembly

5.14 Open Cover

1. Before you remove the Open Cover, you should
remove:
- Top Cover (Refer to the 5.13)
2. Remove two screws and take out the Stopper.
3. Take out the Open Cover as shown below.

5.15 Inner Cover

1. Before you remove the Inner Cover, you should
remove:
- MPF Ass'y (Refer to the 5.3)
- Top Cover (Refer to the 5.13)
Service Manual
5-14
4. Release the lock as shown below and lift up the
Stopper
Open Cover
2. Remove two screws and take out the Inner Cover.
Sensor Cap.
Micro Switch PBA
Sensor Cap
Inner Cover