Optional Sea Freight Packaging (Wooden Box) - ABB PowerWave 33 Series 3 User Manual

3.3.2 Optional sea freight packaging (wooden box)

Perform the following steps to unpack the UPS equipment from the sea freight package:
1.
Disassemble the wooden box by removing all screws.
2.
Remove the plastic film and bag from the UPS, by cutting it without causing damage to the cabinet;
the edges are not protected.
3.
Remove the accessories form its location, see Figure 8 on the next page. The std. set of
accessories is: user manual, 2x painted sockets, screws, 4x feet and keys.
4.
Tear out the 2x humidity-absorber. One is inside the front part of the UPS: open the door using the
keys and then tear out the absorber. The other one is at the back as shown in Figure 9 (next page)
5.
Follow the steps 5) - 7) of the previous section 3.3.1.
1)
Figure 7: Photograph and 3D drawing of PowerWave 33 S3 with sea freight packaging.
Modifications reserved
Page 12/50
2)