Revision History - ABB PowerWave 33 Series 3 User Manual

Document information
File name : TDS_ABB_PW33_S3_60-120kW_EN_REV-A.docx
: PowerWave 33 Series 3
UPS model
Date of issue : 02.02.2016
Article number : N/A
Document number : 4NWD003258
Revision : A

Revision history

Revision number
140714
140730
150206
REV-A
Modifications reserved
Page 2/15
Chapter Description
9.1 Cable entry: bottom bottom, bottom rear
Parallel capability: up to 10 frames up to 6
frames
9.2 Corrected "Current (r.m.s), maximum (with
charging batt. and input 400/230V)"
102
101
9.8 Added fuse type on the description of the
Fuse E in tables 13 and 14.
Type: gR or CB
9.1 Added "Acoustic noise (acc. to IEC 62040-3)"
figures
9.2 Added "rated short-time withstand current
(I )" figure
CW
9.3 Added "Eco-mode efficiency, linear load"
figure
9.3 Added "AC / AC efficiency in normal mode,
linear load" figures for each model.
9.7 Added "head dissipation without load" figures
9.8 Corrected the recommended wiring for
batteries (Cable E) tables 13 and 14 like in
section 4.4
N/A New release for some user manual corrections
N/A Updated the entire layout of the document
7 Updated the entire "Installation planning"
chapter
9 Corrected the IA3 and IA4 references on the
block diagram picture.
135 168 202
134 167 201
Date
14.07.2014
30.07.2014
06.02.2016
04.02.2016