Communication Ports; 1 Usb And Winpower Communication Ports; Usb And Rs-232 Communication Ports; Usb For Hid Power Device - ABB PowerValue 11T G2 Series User Manual

8 C O M M U N I C AT I O N P O R T S
—

8 Communication ports

—

8 1 USB and WinPower communication ports

8 1 1
To establish communication between the UPS
and a computer, use an appropriate
communication cable.
8 1 2
The USB interface offers a "smart battery"
feature which supports Human Interface Device
(HID) Power Device Class and does not require
additional software to be installed.
The computer's Operating System (OS), such as
Windows/Linux/Mac OS, comes with an
embedded power management and monitoring
function. When the computer connects to the
UPS via USB cable, the UPS is automatically
recognized by the OS as an "HID UPS Battery",
and you can configure the alarm action in the
event of low battery, such as shutting down the
computer automatically. This feature on the UPS
is also ideal as a back-up power for the Network-
Attached Storage (NAS).

USB and RS-232 communication ports

USB for HID power device

8 1 3 Mini AS400 interface (optional)
The UPS is equipped with isolated dry contact
relay outputs to indicate its status.
These relay outputs indicate Mains/Utility failure,
Battery low, UPS alarm/OK, Bypass, etc.
To see more detail about the interface definitions,
check the Mini AS400 user manual.
8 1 4 Mini WinPower ModBus card (optional)
The Mini WinPower ModBus card provides
connection to Modbus protocols with a standard
RS485 signal.
To see more detail, check the Mini WinPower
ModBus card user manual.
8 1 5 Mini WinPower SNMP card (optional)
The Mini WinPower SNMP card allows the UPS to
communicate in a variety of networking
environments and with different device types.
The Mini WinPower SNMP card achieves remote
management for the UPS through internet/intranet.
Contact your local dealer for further information, or
check the Mini WinPower SNMP card user manual.
21