Of Container Types; Current Container Type; X-Ray Source; Fill Level - Filtec FT-70c Service And Technical Reference Manual

Chapter 5: System Software

# of Container Types

The maximum number of different container types that will be
inspected by this FT-70. The maximum number allowed is deter-
mined by available system memory. The value entered for this
function determines the number of Current Container Types
available.

Current Container Type

A set of stored system parameters for a particular container type.
This function allows you to configure the FT-70 for a specific
container and then save the configuration to memory for recall
when switching between container types. When you switch
production between container types, you need only select that
container type from the Current Container Type list, and all
settings are loaded.
The number of container types is determined by the # Of
Container Types function, and the name for each container type is
entered in the Container Text function.

X-ray Source

Tells the FT-70 software that the X-ray Source Generator is present
and inserts the X-ray Status Function into the software. When set
to Not Present it removes the X-ray Status Function from the
software.
This function does not activate or deactivate the X-ray Source
Generator, it only readies the machine. To turn the x-ray generator
on or off you must use the X-ray Status Function.

Fill Level

Prepares the FT-70 software for fill level inspection by inserting the
necessary options into the software. When set to Not Present it
removes the options necessary for fill level inspection from the
software.
This function does not activate or deactivate fill level inspection, it
only readies the machine. To turn fill level inspection on or off you
must use the Fill Level Status function.
Industrial Dynamics Company, Ltd. © Form 40256-0600
5-31