Taking Less Than Three Measurements; Screen" Mode - Microlife WatchBP Office Central Instruction Manual

6) Three consecutive measurements – The device
will take three consecutive measurements with
one minute intervals between measurements.
1
60
seconds seconds
A 60-second countdown before each measurement.
*
7) The average value of the measurements –
The average value will be displayed after the
measurements.
SCREEN
2 60
60
seconds
SCREEN

Taking less than three measurements

The measurement sequence can be stopped at
anytime by pressing the Start/Stop Button in
«SCREEN» Mode. The device enters Standby Mode
3
and the remaining measurements are cancelled.
Average of the measurements is saved and can be
viewed by pressing the M Button.
If one of the three measurements fail, a 4
*
measurement will be conducted.
If the 3 measurements is cancelled by pressing the
rd
*
Start/Stop after the 2
are calculated and saved to the memory as well. Press
the M button displays the average, you can continue
to press M-button to see the reading of the 2
the 1 st measurement.
WatchBP Office Central
Cancel remaining
measurements at
anytime during the
measurement sequence.
measurement, the averages
nd
th
and
nd
17
EN