Taking Less Than Three Measurements - Microlife WatchBP Office Central Instruction Manual

6) Three consecutive measurements – The device will
take three consecutive measurements with one minute
intervals between measurements.
60 1
seconds seconds
F
A 60-second countdown before each measurement.
7) The average measurement value – The average
blood pressure value will be displayed after the
measurements.
2 60
60
seconds

Taking less than three measurements

The measurement procedure can be stopped at anytime
by pressing the Start/Stop button in «SCREEN» mode.
The device enters Standby mode and the remaining
3
measurements are cancelled. The average of the
measurements is saved and can be viewed by pressing the
<<M>> button.
F
If one of the three measurements fail, a 4
conducted.
F
If the 3 measurements is cancelled by pressing the Start/
rd
Stop after the 2 measurement, the averages are calculated
nd
and saved to the memory as well. Press the <<M>> button to
display the average value. Press the <<M>> button again to
see the 2nd and 1st measurement again.
WatchBP Office Central
Cancel remaining
measurements at anytime
during the measurement
sequence.
measurement will be
th
14
EN