Central» Mode - Microlife WatchBP Office Central Instruction Manual

Taking measurements using WatchBP Office Central (cont.)
«CENTRAL» Mode
1) Turn on the power – Turn on the device by
switching the I/O switch at the back of the device
to the ON position.
DC 7.5V 2.0A
2) Apply the cuff – Properly fit one cuff to the
preferred measurement arm.
Additional visual instruction can be found on the cuff
*
18
3) Switch to «CENTRAL» Mode – Slide the Mode
Switch to «CENTRAL» Mode.
ABI CENTRAL SCREEN
4) Select the inflation cuff – Set the device to
the preferred measurement side (left or right).
Press and hold the M Button for 3 seconds.
ABI CENTRAL SCREEN
Press and hold
for 3 seconds...
ABI CENTR