Taking fewer than two measurements
In «ROUTINE» Mode only, the measurement
sequence can be stopped at anytime by pushing
the Start/Stop Button. The device enters stand-
by and remaining measurements are canclled.
Data from the measured blood pressure can be by
viewed by pushing the M Button.
Cancel remaining
measurements at
anytime during
the measurement
sequence.
25
Skipping the countdown time
The 60 seconds countdown before measurement in
«SCREEN» Mode and 15 seconds in «ROUTINE» Mode
can be skipped by pushing the Start/Stop Button.
While the Start/Stop Button is pushed, the device will
immediately begin the next measurement.
Skip the countdown time
and begin measurement.
The device can be set into Stand by Mode by pressing
*
the Start/Stop Button after the completion of
measurements. The device will automatically switch to
Stand by Mode if left unattended for five minutes.
Stand by mode