Taking Measurements Using Watchbp Office; Screen» Mode - Microlife WatchBP Office Central Instruction Manual

Taking measurements using WatchBP Office Central
«SCREEN» Mode
1) Turn on the power – Turn on the device by
switching the I/O switch at the back of the device
to the ON position.
ABI CENTRAL SCREEN
DC 7.5V 2.0A
2) Apply the cuff – Properly fit one cuff to each of
the patient's arms.
Additional visual instruction can be found on the cuff
*
16
3) Switch to «SCREEN» Mode – Slide the Mode
Switch to «SCREEN» Mode.
ABI CENTRAL SCREEN
4) Inflation by fuzzy logic – The device will adjust
inflation pressure by fuzzy logic technology
in order to determine the optimal inflation
pressure.
5) Start measurements – Press the Start/Stop
Button to start the measurement sequence.
ABI CENTRAL SCREEN
60-second
countdown...