Hiding Measurement Values - Microlife WatchBP Office Central Instruction Manual

Special Function (cont.)

Hiding measurement values

The WatchBP Office Central features a Hide function
in order to prevent unnecessary elevated blood
pressure in patients due to nervousness triggered by
visible blood pressure values.
This feature is available in both SCREEN mode and
*
CENTRAL mode.
When the «Hide» function is ON, only the average
*
values are displayed after the consecutive
measurements and the Hide icon is displayed.
28
1) Activate the «Hide» Function – Press M button;
L or R flashes; keep pressing and holding the M
Button for 7 more seconds until On or Off flashes.
L or R flashes...
2) Select ON or OFF – Press the M Button again to
turn the "Hide" function ON or OFF.
3) Confirm – Press Start/Stop to confirm the setting.
The default setting of "Hide" is set at "ON" in both
*
«SCREEN» Mode and «CENTRAL».
Press and hold
for 7 seconds...