Microlife WatchBP Office Central Instruction Manual page 35

Err 13 Cuff pressure
errors during
Central blood
pressure
measurement
Err 15 Abnormal
result of
Central blood
pressure
reading
An adequate pressure
cannot be generated in
the cuff. A leak may have
occurred. Check that the
cuff is correctly connected
and is not too loose.
Replace the batteries if
necessary. Repeat the
measurement.
The measuring signals
are inaccurate and no
result can therefore
be displayed. Read
through the checklist
for performing reliable
measurements and then
repeat the measurement.
WatchBP Office Central
HI Pulse or cuff
pressure too
high
LO Pulse too low
The pressure in the cuff
is too high (over 300
mmHg) OR the pulse is
too high (over 200 beats
per minute). Relax for 5
minutes and repeat the
measurement.
The pulse is too low
(less than 40 beats per
minute). Repeat the
measurement.
37
EN