Taking Measurements In Manual And Auto Mode; Turn On The Power; Connect The Cuff To The Device; Select An Operation Mode - Microlife WatchBP Office Instruction Manual

Taking measurements in MANUAL and AUTO Mode

Turn on the power

Turn on the device by pressing the
of the device.

Connect the cuff to the device

Connect the cuff to the device by inserting the
cuff connector into the cuff connector socket.

Select an operation mode

There are two measurement modes that can
be used.
Press the button to switch between
AUTO or MANUAL Mode.

Settings of AUTO Mode

The measurement program in AUTO Mode of the device can be set, includes Number of
Measurements, Resting time (Countdown time), Interval time, AFIB detector, CBP
measurement, HIDE and Average calculation (Discard 1st measurement).
1 Set the Number of Measurements – Press
the button when the device is in AUTO
mode to first enter setting of Number of
Measurements. Use the
and use button to scroll down among one
to six measurements. Press
confirm the number of measurements and enter
Resting time setting.
2 Set the Resting Time – Press the
to scroll up and use
among 15, 30, 60, 120, 180, 240, 300 seconds
of resting time. Press
and enter Interval Time setting.
3 Set the Interval Time – between
measurements - Press the
up and use button to scroll down among 15,
30, 60, 120, 180, 240, 300 seconds of Interval
Time. Press
Interval Time setting.
8
button
button to scroll up
button to
button
button to scroll down
button to confirm
button to scroll
button to confirm and enter