Taking Fewer Than Three Measurements; Skipping The 60-Second Countdown - Microlife WatchBP office Instruction Manual

Special Function (cont.)

Taking fewer than three measurements

In «FOLLOW-UP» Mode, the measurement
sequence can be stopped at any time. By
pushing the Start/Stop button the remaining
measurements in the sequence will be cancelled.
Data from the measurements completed can be
viewed by pushing the M Button.
Cancels remaining
measurements at
anytime during
the measurement
sequence.
23

Skipping the 60-second countdown

In «1st VISIT» and «FOLLOW-UP» Mode, the
60-second pre-measurement countdown can be
skipped by pushing the Start/Stop Button. Once
the Start/Stop Button is pushed, the device will
immediately begin the next measurement.
Skips the 60-second
countdown and begins
measurement.
The device can put into Stand by Mode by pressing
*
the Start/Stop Button after the completion of
measurements. The device will automatically switch to
Stand by Mode if left unattended for five minutes.
Stand by mode