Taking Measurements Using Watchbp Home A Bt; Diag." Mode - Microlife WatchBP Home A Instruction Manual

Taking measurements using WatchBP Home A BT

Prior to each measurement, use the Mode Switch on the
right side of the device to select the proper measurement
mode. The two options include:
«DIAG.» (Diagnostic) or «USUAL» (Usual) mode.
DIAG.
8
«DIAG.» Mode
The «DIAG.» mode should be selected as requested
by your doctor when blood pressure is measured in
accordance with the measurement guidelines of the
European Society of Hypertension (ESH).
USUAL
DIAG.