Channels; Current Values - Beko METPOINT BDL compact Instructions For Installation And Operation Manual

14.6 Channels

Main menu  Channels
Halle 1.1 Druckluft
Flw 1165.200 m³/h
Con 27366 m³
Vel 180.000 m/s
Halle 2.1 Taupunkt
Dew -9.20 °Ctd
Hum 9.5 %rH
Tmp 22.30 °C
Main menu  Channels A1
Flw 1165.200 m³/h
Con 27366 m³
Vel 180.000 m/s

14.7 Current values

Main menu  Current values
-9.5 %rH
94
Halle 1.2 Druckluft
Flw 0.750 m³/h
Con 7366 m³
Vel 80.000 m/s
Halle 2.2 Taupunkt
Dew -45.20 °Ctd
Hum 0.25 %rH
Tmp 22.10 °C
1145,55
m³/h
Operation METPOINT® BDL compact
The current values
measured values of all the connected sensors.
In the event that the adjusted alarm limits are
exceeded or underrun, the respective meas-
ured value flashes yellow (alarm-1) or red
(alarm-2).
The individual channels can be selected and the
settings viewed and checked, but no changes
can be implemented here.
Note:
Changes must be effectuated in the settings!
The current values view allows for the indica-
tion of 1 to 5 freely selectable measured val-
ues.
In the event that the adjusted alarm limits are
exceeded or underrun, the respective meas-
ured value flashes yellow (alarm-1) or red
(alarm-2).
Note:
Changes must be effectuated under set-up!
METPOINT® BDL compact
view shows the current