Table of Contents
Advertisement
14.3.2.8 Configuration of analogue sensors
Use only for the METPOINT
Short overview of the possible
12.2.2.1 Selection of the sensor type (example BEKO-Digital sensor type)
sensor with the BEKO-DIGITAL
The
alarm settings, recording
and
value name
are all described in Chapter
For the marking of the text fields, see Chapter
14.3.2.8.1 Type 0/4 – 20 mA
Main menu Settings Sensor settings B1 Type text field 0-20 mA
Main menu Settings Sensor settings B1 Right arrow (2
48
®
BDL compact. Variants with an assembled analog board are possible.
Type
settings including examples. For BEKO-Digital, see Chapter
type.
buttons, the
resolution
12.2.2 Sensor
12.2.2.7 Marking and setting text
Operation METPOINT® BDL compact
and
of the decimal places as well as the
settings.
Scaling of the sensor (here, for example,
0 – 20 mA
- corresponds to 0 – 25 bar) can be
found in the data sheet of the connected sen-
sor.
e.g. SP21
nd
page)
For
scale 4 mA,
please enter the lower scale
value and for
scale 20 mA
value.
The
ext. sensor supply voltage
when the sensor requires this.
Please confirm with
METPOINT® BDL compact
12.2.2.6 Dew point
short name
fields!
type
the upper scale
is switched on
OK.
Advertisement
Table of Contents
