Beko METPOINT BDL compact Instructions For Installation And Operation Manual page 88

Main menu  Settings  Logger settings  Start time button/Stop time button  Date/time text field
 Cal button
Main menu  Settings  Logger settings  Start button
Main menu  Settings  Logger settings Start button/stop button
Important:
When a new recording file is to be created, the
Otherwise, the recording file that was created last will be used.
88
Operation METPOINT® BDL compact
By means of the
date can easily be chosen from the calen-
dar.
Subsequent to the
tion and the implemented settings, the
button is pressed and the data logger is on
active.
The data logger will start recording at the
set time!
The data logger can also be activated and
deactivated without activated time settings,
namely by means of the
tons.
On the lower left, it is indicated, how many
values are being recorded, and for how
long recording can be continued.
Note:
Settings cannot be changed when the data
logger is activated.
Force-new-record-file
Cal button, the desired
start or stop time activa-
Start
Start and Stop but-
button must be activated.
METPOINT® BDL compact