Sensor Settings; Selection Of The Sensor Type (Example: Beko Digital Sensor Type) - Beko METPOINT BDL compact Instructions For Installation And Operation Manual

14.3.2 Sensor settings

Important:
Sensors from BEKO TECHNOLGIES are generally pre-configured and can be directly connected
to a free sensor channel!
Main menu  Settings  Sensor settings
Note:
Depending on the version of the METPOINT

14.3.2.1 Selection of the sensor type (example: BEKO digital sensor type)

Main menu  Settings  Sensor settings  A1
METPOINT® BDL compact
®
BDL compact, the following combinations are possible:
Combination
1
Channel
A1 D
A2 D
B1
B2
D = Digital channel
Operation METPOINT® BDL compact
After having entered the password, an overview
of the available channels will appear.
Depending on the version, these are 2 or 4 chan-
nels.
Note:
Normally, no channels are preset!
2 3 4 5 6
D D A A A
D D A A A
D A A D
D A A D
A = Analogue channel
If no sensor was configured yet, the,
Type no sensor will appear.
By pressing on the text field
sor, you will go to the selection list of the
sensor types (see next step).
Type no sen-
37