Reset Factory Defaults; Calibrating The Touch Screen - Beko METPOINT BDL compact Instructions For Installation And Operation Manual

14.3.3.7.5 Reset factory defaults

Main menu  Settings  Device settings  System  Reset factory defaults

14.3.3.8 Calibrating the touch screen

Main menu  Settings  Calibration touch screen
68
Operation METPOINT® BDL compact
If required, the BDL can be re-booted by
pressing the Restart
If required, the screen calibration can be changed
here.
Press Calibrate, and a calibration cross will ap-
pear 1. on the upper left, 2. on the lower right,
and 3. in the middle. These crosses must be
pressed consecutively.
When calibration is completed and the indica-
tion is averaged, confirm with OK.
If this is not the case, calibration can be re-
peated by means of
Calibrate again.
METPOINT® BDL compact
button.
Cancel and by pressing