Example Calculation "Specific Performance - Beko METPOINT BDL compact Instructions For Installation And Operation Manual

14.3.8.6 Example calculation "specific performance"

As an example, a compressor plant with three compressors is taken as the basis.
Consumption measurement in each case with an FS109 consumption probe at inputs A1 - B1,
and an electric meter at input B2.
The total consumption of air and energy, and the "specific performance" of the entire plant are calcu-
lated.
Main menu  Settings  Sensor settings  Virtual channels  V1 Right arrow (2
 Use
78
Operation METPOINT® BDL compact
Selection and entry of the operands and opera-
tions see Chapter 12.2.6.4.2
12.2.6.4.3.
The result for V1a is the sum of consumption
sensors A1 + A2 + B1, see result zone. In this
example, it is 66,090.2 m³
METPOINT® BDL compact
page)  V1a
nd
and Chapter