Table of Contents
Advertisement
Important
Important
When all of the values and operators are applied, calculations with three values and 2 oper-
ands are possible, which are solved according to the following formula:
Example:
V1a = (1
V1a = (A1c – A2a) * 4.6
14.3.8.5 Resolution of the decimal places – designating and recording data values
Main menu Settings Sensor settings Virtual channels V1 Tool button
76
st
st
operand 1
operation 2
Operation METPOINT® BDL compact
Define the unit and accept with OK.
By means of buttons
be corrected.
Button
erases the last character
Button
Clr
erases the entire value
nd
nd
operand) 2
operation 3
The
resolution
of the decimal places,
name
and
value name
Tool button
With the
Recording
button, the data are se-
lected which are stored at an activated data
logger.
For the
value
to be recorded, a
characters can be entered in order to simplify its
identification at a later moment in the menu
items
Graphics
and
Otherwise, the designation would be V1a, for
example.
V1
is the channel name and
value in the channel,
c
the third.
The
resolution
of the decimal places is easily ad-
justable by pressing right and left (0 to 5 decimal
places).
and
Clr,
the entry can
rd
operand
short
can be found below the
name
with 10
Graphics/current
values.
a
the first measured
b
would be the second, and
METPOINT® BDL compact
Advertisement
Table of Contents
