Beko METPOINT BDL compact Instructions For Installation And Operation Manual page 103

Declaration of conformity
BEKO TECHNOLOGIES GMBH
41468 Neuss, GERMANY
Phone: +49 2131 988-0
www.beko.de
EC Declaration of Conformity
We hereby declare that the products indicated hereafter, in the delivered performance, comply with the stipu-
lations of the relevant EU directives in force. This declaration only refers to products in the condition in which
they have been placed into circulation. Parts which have not been installed by the manufacturer and / or
modifications which have been implemented subsequently remain unconsidered.
Product designation:
Supply voltage:
IP degree of protection:
Ambient temperature:
Product description and function:
Low voltage directive 2006/95/EG
Applied standards:
Year of fitting with CE mark:
EMV directive 2004/108/EG
Applied standards:
ROHSIIDirective2011/65/EU
The stipulation of the 2011/65/EU Directive on the restriction of the use of certain hazardous substances in
electrical and electronic equipment are observed.
The products are labelled with the sign shown below:
Neuss, 06.10.2014
METPOINT® BDL compact
®
METPOINT BDL compact
100 ... 240 V AC / 1Ph. / PE / 50-60Hz
IP 44
0 ... +50 °C
Data logger for storing and registration of stationary
measurement data for industrial applications.
EN 61010-1:2010
14
EN 61326-1:2013, EN61326-2-3:2013,
EN 55011:2009+A1:2010
BEKO TECHNOLOGIES GMBH
p.p. Christian Riedel
Head of Quality Department
103