Relay Settings; Sd Card - Beko METPOINT BDL compact Instructions For Installation And Operation Manual

14.3.3.5 Relay settings

Main menu  Settings Device settings Relay settings

14.3.3.6 SD card

Main menu  Settings  Device settings SD card  Reset logger data base
Main menu  Settings  Device settings SD card  Erase SD card
64
Operation METPOINT® BDL compact
When activating the Relay
allow for a relay cut-off by means of the indicated
alarm message.
Settings are only possible in the password-pro-
tected menu.
A message is shown when an alarm occurs, here,
e.g., alarm 1 (yellow) of channel A1.
If it was allowed to cut off the relay under
tings, it can be cut off by pressing the
ton.
The message can be suppressed by pressing the
OK button.
By pressing the Reset logger data base,
rently stored data are blocked from use in the
BDL. However, the data remain stored on the SD
card, and are available for external use.
By pressing the Erase SD card
data are completely deleted from the SD card.
buttons, it is possible to
Relay set-
Relay 1
button, all of the
METPOINT® BDL compact
but-
the cur-