Table of Contents
Advertisement
3
General safety instructions
Please check whether or not these instructions correspond to the device type.
Please adhere to all advice given in these operating instructions. They include basic infor-
mation which needs to be observed during installation, operation and maintenance. There-
fore, it is vital for the technician and the responsible operator/qualified personnel to read
these operating instructions prior to installation, start-up and maintenance.
The operating instructions must be accessible at all times at the place of application of the
METPOINT
In addition to these operating instructions, local and national regulations need to be ob-
served, where required.
Ensure that operation of the METPOINT
missible limit values indicated on the type plate. Any deviation from these limit values in-
volves a risk for persons and for the material, and may result in malfunction or a service
failure.
If you have any queries regarding these installation and operating instructions, please con-
tact BEKO TECHNOLOGIES.
Warning!
Risk of injury in the event of insufficient qualifications!
Improper use can lead to significant personal injury and material damage.
All of the activities described in these operating instructions must only be carried out by
qualified personnel with the qualifications described hereinafter.
Qualified personnel
Due to the specific training and knowledge concerning the measuring and control technology, and due
to their experience and knowledge of the country-specific provisions, standards in force and directives,
qualified personnel are capable of carrying out the described work and of independently identifying the
possible risks.
Special employment conditions require further corresponding knowledge, e.g. regarding aggressive
media.
Caution!
Malfunctions of the BDL compact
Through incorrect installation and insufficient maintenance, malfunctions of the BDL may
occur. These can affect the indications and lead to misinterpretations.
Danger!
Inadmissible operating parameters!
Under-running or exceeding the limit values involves risks for persons and the material,
and malfunction and service failures may occur.
Measures:
•
Make sure that the METPOINT
that are indicated on the type plate.
•
Exact compliance with the performance data of the METPOINT
the case of application.
•
Do not exceed the permissible storage and transport temperature.
Further safety advice :
•
During installation and operation, the national regulations and safety instructions in force also need
to be observed.
•
The BDL must not be employed in hazardous areas.
Additional instructions:
•
Do not overheat the device!
6
®
BDL compact.
®
BDL compact is operated only within the permissible limit values
General safety instructions
®
BDL compact only takes place within the per-
®
BDL compact in connection with
METPOINT® BDL compact
Advertisement
Table of Contents
