Appendix A Post Error Beep Codes - Supero SUPERSERVER 5017K-N6 User Manual

During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue with bootup procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the cor-
responding errorRecoverable POST Error Beep Codes
Beep Code/LED
1 beep
5 short beeps
5 beeps
1 beep per device
Appendix A
POST Error Beep Codes
BIOS Error Beep Codes
Error Message
Refresh
Memory Error
No con-in or no con-out
devices
Refresh
Appendix A: POST Error Beep Codes
Description
Ready to boot
No memory detected in the system
Con-In: USB keyboard, PCI or Se-
rial Console Redirection, IPMI KVM
or SOL
Con-Out: Video Controller, PCI or
Serial Console Redirection, IPMI
SOL
1 beep for each USB device
A-1