Supero SUPERSERVER 5017K-N6 User Manual page 89

Device Settings
This feature displays the base I/O port address and the Interrupt Request
address of Serial Port 0~1.
Change Port Settings
This option specifi es the base I/O port address and the Interrupt Request
address of the Serial Port. Select Auto to let the BIOS automatically as-
sign the base I/O and IRQ address.
The options for Serial Port 0 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6,
7, 10, 11, 12).
The options for Serial Port 1 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6,
7, 10, 11, 12).

Serial Port Console Redirection
COM1~COM2
Use this feature to enable console redirection for COM1~COM2. The options are
Enabled and Disabled. The default for COM1 is Enabled, and Disabled for COM2.

Console Redirection Settings (COM1/COM2)
Confi gure the following options for the Console Redirection Settings. The
most common settings are set as default:
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 38400, 57600, or 115200
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2
Flow Control: None or Hardware RTS/CTS
VT-UTF8 Combo Key Support: Enabled or Disabled
Recorder Mode: Disabled or Enabled
Resolution 100x31: Disabled or Enabled
7-15
Chapter 7: BIOS