Onboard Processor And Heatsink; Installing Memory; How To Install So Dimms; Memory Support - Supero SUPERSERVER 5017K-N6 User Manual

S S
UPER ERVER 5017K-N6 User's Manual
5-4

Onboard Processor and Heatsink

The X9SKV-B915 features an embedded Intel Pentium B915C processor.
5-5

Installing Memory

Caution! Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
Note: Check the Supermicro website for a list of memory modules that have been
validated with the X9SKV-B915 motherboard.

How to Install SO DIMMs

1. Insert the desired number of SO DIMMs into the memory slots, starting with
DIMMA1, DIMMB1, then DIMMA2, DIMMB2. Pay attention to the notch along
the bottom of the module to prevent incorrect DIMM module installation.
2. Insert each SO DIMM module vertically and snap it into place. Repeat step 1
to install DIMMB1 if needed. See instructions on the next page.

Memory Support

The X9SKV-B915 motherboard supports up to 32GB of ECC DDR3-1333/1066
SODIMMs in four SODIMM slots.
Module Notch
Figure 5-3. Installing Memory
Socket Key
Module Key
5-4
Module Notch