Supero SUPERSERVER 5017K-N6 User Manual page 88

S S
UPER ERVER 5017K-N6 User's Manual
PCI / PCIX / PCIe Slot 6/7 OPROM
Select Yes to enable OPROM for a PCI slot as specifi ed. The options are Disabled,
Legacy and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unifi ed Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system
using a legacy device installed in a PCI slot. The options are Do not launch, UEFI
only, Legacy Only, Legacy fi rst and UEFI fi rst.
Other PCI Device ROM Priority
This feature selects a PCI device Option ROM for system boot if this device is not
a network, mass storage, or video device. The options are UEFI Only and Legacy
Only.
Onboard LAN1 Option ROM ~ Onboard LAN6 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer using a PXE
device installed in a LAN port specifi ed. Select Disabled to prevent system boot
using a device installed in a LAN port. The options for Onboard LAN1 Option ROM
are Disabled, PXE, and iSCSI.The options for Onboard LAN2~LAN6 Option ROM
are Disabled and PXE.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
Ipv4 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot
support. If this feature is set to Disabled, Ipv4 PXE boot option will not be
supported. The options are Enabled and Disabled.

Super IO Confi guration
NCT6683D Super IO Chip

Serial Port 0~1 Confi guration
Serial Port
Select Enabled to enable onboard serial ports. The options are Enabled
and Disabled.
7-14