Ethernet; Typical Ethernet Straight-Through Cable Diagram For 10/100Base-T; Typical Ethernet Straight-Through Cable Diagram For 1000Base-T - Patton SmartNode SN4170 User Manual

SmartNode 4170 User Manual

Ethernet

Ethernet devices (10/100/1000 Base-T) are connected to the SmartNode over a cable with RJ-45 plugs. The
Ethernet port on the SN4170 is Auto-MDX. Use any straight or crossover cable to a host, hubs, switches, PCs
or other devices.
CAUTION
CAUTION
R e
s e
1 2 t
V ,
1 A
C o
n s
o le
U S
B
RJ-45, male
Figure 13. Typical Ethernet straight-through cable diagram for 10/100Base-T
RJ-45, male
Figure 14. Typical Ethernet straight-through cable diagram for 1000Base-T
Ethernet
The interconnecting cables shall be acceptable for external use
an shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
For the ISDN connection to a carrier network, it shall be con-
nected to a network termination device and not connected
directly to an outside POTS line.
E T
H 0
/ 0
P R
I 0
/ 0
Straight-through cable
1
2
3
6
Note: Other pins are not used
1
2
3
4
5
6
7
8
Switch or Hub
RJ-45, male
1
2
3
6
RJ-45, male
1
2
3
4
5
6
7
8
C • Cabling
48